ERDC/CHL CHETN-I-69
March 2005
remaining rows contain the input parameters as shown. The names and units columns are read-only.
The value column is editable.
Figure 8. 1D Runup and Overtopping calculator
Table 4.
Input Parameters for Runup and Overtopping
Parameter
Value
Units
Wave Type
Choose between "Regular" and "Irregular". Titles of the wave height and period
-
change depending on wave type. Default is "Regular"
Wave Height (H) (regular)
User must specify
m
Significant Wave Height
(Hs) (irregular)
Wave Period (T) (regular)
User must specify
sec
Peak Period (Tp) (irregular)
Depth at Toe of Breakwater
User must specify
m
(ds)
Crest Elevation above Still
User must specify
m
Water (Zc)
Side Slope (m)
User must specify
-
Offshore Slope (p)
User must specify
-
1/2
Chezy Roughness
User must specify
m /sec
Coefficient
10
Previous Page
